a

Lorem ipsum dolor sit amet dictum antektem por eget faucibus et urna eu maecenas loramr viverra aliquam lorem id tincidunt

Instagram
Hemlock St, Brooklyn, NY 11208 5 Bridge St, Brooklyn, NY 11201 +321 856 964 108

Stropanel

How to Create Your Own Dog Mask – The Fundamentals

In this report we’re going to look at how to make your own dog mask. We’ll cover the basics and then go on to take a look at a number of the more advanced tips and techniques that you can use.

For those who have a dog that likes to bark, and especially if your dog loves to play in the garden and other areas of read more the house, you need to get them some special dog protection.

Paper Plate 3d Dog Mask DIY Materials: This is the initial part of the set-up which will look a little scary at first, but it’s really very simple. All you have to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can’t just cut a rectangular shape from the cardboard, so you will need to cut around the edge of the mask so you get something which looks like a cone. The most important thing here is to be realistic with what kind of paper plate which you’re using.

Then you’ll have to wrap the cardboard around the edges of the paper plate, making certain there is a good seal between the two pieces so that you can make certain that nothing will leak when you put the mask on. Be sure the edges are cut so that the edges are not sharp, as this can damage the edges of the mask.

Glue it on! The next step involves using some paint. You ought to spray the paint over the cardboard, making sure that it runs smoothly and evenly across the entire mask. You will want to start with one side of the mask first, so that you can work your way around it before moving onto the other side. The paint needs to be slightly thicker than the cardboard, and it is best that you leave about one-third of an inch of paint on the edges so that it runs across the cardboard.

Don’t fret too much about the paint getting stuck to your mask. It’s easy to eliminate it later, and it’ll leave you with a wonderful finished mask to show off to everybody! It’s also a good idea to wipe away any excess paint once you are done, so that you don’t end up with smudges or smears on your dog.

Then it is time to glue the mask onto your dog’s head. First you need to make sure that you get a secure fit between the mask and your dog’s head. As soon as you’ve made sure that it’s secure, then you can start to glue the mask on the dog’s face. Take the piece of cardboard that’s used for the base of the mask and then fold it over. Make sure that it’s quite powerful and then use your hands to secure the cardboard down in place.

Keep your hands out of the way and use tape to hold it in place as you repeat the process on the cardboard folds till you’ve got the mask snugged firmly onto the surface of your dog. Don’t make the folds too large or else it might look messy. Once you’ve done this, you can then take out the mask and attach the cardboard ears. And attach the other area of the mask on the dog. Make certain the ears are level and be certain it is not too short or long as this will cause some problems with the mask slipping off the dog’s face.

If you are using a dog mask because your dog protection, you’ll have to do some sanding to be certain it’s secure on your dog. You can accomplish it by sanding off any excess paper that may have been removed from your mask.

Post a Comment